Skip to content
Plants in a bathroom
Bathroom Cleaning

How to Clean Tiles and Grout

Dirt, soap scum, & mould can build up on tiles and grout without regular cleaning. Keep your tiles looking great with these simple tile & grout cleaning tips!

Key Points 

  1. Steam-cleaning tiles is a very effective method
  2. Run the shower on a high temperature before cleaning – it’ll open up pores in the tiles and make them easier to clean
  3. Do not use bleach or vinegar on tiles – they can damage the grouting

Not sure what bathroom tile cleaners to use? Wondering how to clean them effectively and remove soap, scum and limescale? Cleaning tiles requires a different method to cleaning the shower, but it’s not complicated or time-consuming. Here are a couple of strategies for cleaning bathroom tiles that make the process easy and effective.

Tile & Grout Cleaning with Steam

A steam cleaner can be used on various surfaces in your house – from carpets to ceramics –to help remove built-up dirt. By heating the material, a steam cleaner opens up pores in the material’s surface to release the most hardened muck. All you need to do is apply steam to the surface of the tile, and then wipe off the dirt.

Steam is a straightforward, natural tile cleaner, but make sure you take the necessary precautions and follow the manufacturer’s instructions for handling a steam cleaner.

Best Bathroom Tile Cleaners

If handling a steam cleaner seems a little too intense, don’t worry – there are plenty of specialist bathroom tile cleaners, like Cif, to make your job easier. Remember to follow the product’s instructions, ventilate the room, and wear rubber gloves to protect your hands.

If you are researching how to clean bathroom floor tiles, look no further than Domex floor cleaner, which has the strength to kill germs that linger on your floor. After all, the dirtiest of places need the toughest clean. Simply follow the directions on the bottle, being sure to keep the area well ventilated and any children or pets well out of the way while there are chemicals being used.

To ensure a thorough clean, run the shower on a high temperature for a while before you begin cleaning, as this will work in the same way as the steamer to open ceramic pores, making the surface easier to clean.

Once your tiles have been scrubbed down, you might be wondering how to clean tile grout. A separate tile grout cleaner isn’t usually necessary, but you might have to use a stiff brush, such as an old toothbrush, to loosen any stubborn dirt in the grouting before you wipe it away. Just make sure you thoroughly rinse any area you clean with clean water afterwards so that no harsh chemicals are left behind, as these can damage delicate ceramic surfaces if left on too long. Similarly, it’s best to refrain from using some common household products, such as bleach and vinegar, for tile and grout cleaning – these can eat away at the grout if not carefully rinsed out with water.

If any stains persist, you can mix a paste with baking soda and water, rub it on the surface of the tiles and leave it on for an hour to get your bathroom tiles cleaner. Rinse the tiles with warm water to get rid of any residue and you’re done!

With these simple tips, your bathroom tiles will shine again – what more could you want?

Cleanipedia recommends

Don’t worry if your bathroom tiles are looking grimy and dull – bathroom tile cleaners like Cif are made to get rid of soap scum, limescale and general dirt. For the best results, follow the instructions on the label. Always wear rubber gloves while cleaning and make sure the room is well-ventilated.

Safety Warning

Use biocides safely. Always read the label and product information before use.