Repair That Leaky Pipe in Your Kitchen Like a Pro!

One of the most common and annoying problems in the kitchen is a leaking pipe. You should fix it as soon as you spot the leak to save water from being wasted. Here’s how you can do that.

Updated

Steps to fix a leaking kitchen pipe

Leakage is generally caused by a worn-out plastic seal and rubber washer between the sink and the strainer. Repairing a leaking pipe can look like a complex task, but we’ve found the perfect way to help you fix the problem. There’s no need to worry, it’s simple and easy.

Try these effective steps to fix a leaking kitchen pipe.

Use a wrench to unscrew the nuts if they are too tight.

Step 1:

Turn off the water supply before fixing the leak.

Step 2:

Place a bucket under the strainer and unscrew the nuts that hold the waste pipe. Remove the pipe and empty the water into the bucket.

Step 3:

Disconnect the overflow pipe from the side of the strainer. Unscrew the drainer and remove the lower half of the strainer unit.

Step 4:

Remove the drainer lid and clean the sink and the hole using a paper towel.

Step 5:

Change the rubber washers. Align the top part of the strainer with the thin rubber on the top of the sink, and then place the thicker portion underneath the strainer’s bottom half.

Step 6:

Tighten the screws and reconnect the overflow pipe and trap. Switch on the water supply to check the flow.

That’s it, your sink should now be fixed and ready to use!

Your kitchen is the most used space in your home. Ensure that it’s always clean. An unattended leaky pipe or faucet invites pests and serves as a breeding ground for bacteria. Use this method to evade such problems, effortlessly!

Originally published