Ever find that the water in your shower takes a very long time to empty? This is most likely caused by a clogged shower drain. Hair, soap scum, and other debris from months of washing can not only cause a blockage, but also an unpleasant odor. But before you ring a plumber for a costly visit, there are a number of ways you can do the job yourself. This article tells you how to unclog shower drains, with a few different (and effective) methods to choose from.
Mechanically Unclogging a Shower Drain
You may want to try physically pulling out any blockage in the drain. As a tool, you can use a thin wire coat hanger or a crochet hook. There is also a drain snake and other specially designed tools for removing hair, which you may be able to buy in a homeware or DIY store.
- Bend the hanger so there is a small hook at the end, which can be inserted down the drain.
- Put on a pair of rubber gloves, if you’d like, and have a plastic bag ready for whatever debris you may pull out.
- Unscrew the shower drain cover (if there is one) and set it and any screws safely aside.
- Slowly insert the hooked end of the wire hanger down the drain using a slight twisting motion.
- Start tugging upwards slowly, and you will start pulling hairs out. Place them straight into the plastic bag.
- Keep on repeating until you pull out no more hair.
To finish off, follow our steps below for flushing the drain with baking soda and vinegar.
How to Unclog the Shower Drain with Commercial Drain Cleaners
There are many commercial products specially designed to clear your shower drain blockage, with regular bleach like Domex also able to do the job. These products can remove small blockages with very little effort required from you. If you choose to use one, remember to follow all the directions on the label and to take adequate safety precautions beforehand – make sure the room is well ventilated and wear rubber gloves.